Schneider Electric PowerLogic PM8240
Integrate the Schneider Electric METSEPM8240 for read-only power and power-quality monitoring over its documented Modbus interfaces.
- Energy meters
Device Directory
Meters, sensors and controllers, and how each connects to Edge.
279 device pages · 84 manufacturers with device pages
Device database results
283 devices
Shelly Pro 3EM
Connect the 120 A Shelly Pro 3EM to Edge over Modbus TCP. A read-only triphase map, exact register offsets and a worked voltage check.
- Energy meters
Siemens SENTRON PAC2200
Three-phase DIN-rail power meter with Modbus TCP on Ethernet or Modbus RTU on RS-485. Edge reads it over the site network, a Modbus interface or the Gateway’s serial port.
- Energy meters
Siemens SENTRON PAC3120
PAC3120 is a CT-connected panel meter with built-in RS-485. Read its literal Modbus offsets, configure the serial framing and verify the meter’s CT settings before collecting power and energy.
- Energy meters
Siemens SENTRON PAC3220
The PAC3220 is a CT-connected panel meter with two switched Ethernet ports and local Modbus TCP. Its hardware write-protection switch can preserve a monitoring-only configuration while Edge reads power, demand and energy.
- Energy meters
Siemens SENTRON PAC4200
Assess an installed Siemens SENTRON PAC4200 for power and energy monitoring while keeping legacy-product, Modbus decoding and configuration-write boundaries explicit.
- Energy meters
SMA Sunny Boy Storage SBS5.0-10
Sunny Boy Storage 5.0 adds high-voltage battery storage on the AC side of an existing PV installation. It supplies 5 kW on a single phase and has three separately managed battery inputs. It is a battery inverter, not a PV string inverter: keep the existing solar inverter and distinguish the manual emergency outlet from an automatic battery-backup installation.
- Inverters and charge controllers
- Battery systems and controls
SMA Sunny Central Storage UP
Assess the SMA Sunny Central Storage UP battery inverter for read-only monitoring, with exact model, Modbus role, battery and plant-control boundaries.
- Battery systems and controls
SMA Sunny Island 6.0H-13
Monitor Sunny Island battery state, voltage, current and inverter power through its local SMA Modbus TCP interface.
- Inverters and charge controllers
- Battery systems and controls
SMA Sunny Tripower 10.0 Smart Energy
Read local inverter and battery measurements through the SMA Modbus interface, with explicit firmware scope and separate site-meter measurements.
- Inverters and charge controllers
SMA Sunny Tripower CORE1
Compare the SMA Sunny Tripower CORE1 STP 50-40 and 50-41, including firmware scope, default-off Modbus and a safe read-only monitoring plan.
- Inverters and charge controllers
SMA Sunny Tripower X 60
Sixty-kilowatt STP 60-80 commercial PV inverter with five MPP trackers and a configurable Modbus interface.
- Inverters and charge controllers
SMA Solar Technology Sunny Tripower CORE2 STP 110-60
CORE2 STP 110-60 is a 110 kW three-phase PV inverter with 12 MPP trackers.
- Inverters and charge controllers
SMA Solar Technology Sunny Tripower X 25
A 25 kW three-phase PV inverter with three MPPTs and an integrated system manager. Read its own device values separately from whole-system measurements.
- Inverters and charge controllers
SmartGen HGM7220N
Connect HGM7220N monitoring over Modbus RTU using OEM interface documentation.
SmartGen HGM9510
Connect HGM9510 monitoring over Modbus RTU using OEM interface documentation.
SmartGen HGM9560
Connect HGM9560 monitoring over Modbus RTU using OEM interface documentation.
Socomec COUNTIS E23 and E24
Direct 80 A three-phase meters: choose E23 or E24 MID, match RS-485 settings and understand the tariff and billing-data boundaries.
- Energy meters
Socomec COUNTIS E53
Panel-mounted CT energy metering: identify the 5 A input, auxiliary supply, RS-485 settings and four-tariff functions before integrating an installed meter.
- Energy meters
Socomec DIRIS Digiware I-35 AC
Read Socomec DIRIS Digiware I-35 AC through a D-50 or D-70 gateway: identify the load, check current scaling and reject unavailable values.
SolarEdge SE66.6K/SE100K Synergy
SolarEdge SE66.6K and SE100K are three-phase commercial inverters with modular Synergy technology.
- Inverters and charge controllers
SolaX X3-MEGA G2 40/50/60 kW
Three European-voltage commercial string inverter ratings with four, five or six MPPTs and separate RS485 inverter-network and meter terminals.
- Inverters and charge controllers
SolaX Power X3-FORTH
A three-phase commercial string-inverter family from 75 to 125 kW with rating-dependent MPPT configurations.
- Inverters and charge controllers
SolaX Power X3-ULTRA
Connect SolaX X3-ULTRA monitoring through its third-party RS-485 pair or a supported Pocket TCP module, with public voltage, frequency, battery and meter registers.
- Inverters and charge controllers
No devices match your filters
Try a broader model fragment, manufacturer or application.
Filter devices
How this directory works
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents, including BACnet/IP guides. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Compatibility
Each device page explains the documented connection to Edge, what the device reports and how to check its setup. An Edge template is offered only where an exact reviewed import is available.
Sources and images
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
- Devices
- 283
- Manufacturers
- 543
- Device pages
- 279
A device that is not listed
Tell us the manufacturer and model, and we'll look at its documentation.