Janitza UMG 509-PRO
Panel power analyser with a manufacturer FC03 voltage telegram and a separate Modbus address list.
- Energy meters
Meters, sensors and controllers, and how each connects to Edge.
394 device pages · 121 manufacturers with device pages
398 devices
Panel power analyser with a manufacturer FC03 voltage telegram and a separate Modbus address list.
A power-quality analyser with Class A measurement functions, waveform-related recording and network interfaces. Keep routine Modbus readings separate from event records and standards-based PQ analysis.
A DIN-rail analyser with four voltage and current inputs, Ethernet and configurable serial roles. Read its own measurements without confusing a Modbus server with a downstream gateway.
DIN-rail power-quality analyser with an RS-485 Modbus server and a firmware-scoped measurement map.
Modular DIN-rail power analyser with eight current inputs, Modbus TCP on two Ethernet ports, Modbus RTU on RS-485 and a published Float address list from 19000.
DIN-rail power analyser with four 1 A or 5 A current-transformer inputs, a residual-current input, Pt100 temperature measurement and built-in Modbus RTU. The optional 806-EC1 adds Ethernet.
The blueplanet 92.0, 105 and 125 TL3 are 1500 V commercial string inverters with one MPP tracker.
Read heat and cooling energy, volume, power, flow and temperatures from a MULTICAL 603 through Kamstrup's Modbus RTU module or a wired M-Bus module. Includes Kamstrup's documented heat energy record.
96 x 96 mm panel power analyser from KBR with a colour TFT display, external 1 A or 5 A CTs and Modbus RTU or Modbus TCP on the MS, ESMS and MT device types.
Read PLENTICORE G3 PV, battery and energy-meter values over KOSTAL's local Modbus TCP interface on port 1502, unit ID 71.
A 30, 50 or 60 kW three-phase PV string inverter with two or four MPPTs, two Ethernet ports, Wi-Fi and RS485, serving KOSTAL Modbus and SunSpec registers.
Three-phase DIN-rail Modbus meter from Leviton, sold as 4KUMR DIN-rail and 4OUMR outdoor NEMA 4X kits with split-core or Rogowski CTs, with Modbus RTU on a 2-wire RS-485 port.
A DIN-rail CT meter with built-in isolated RS-485, model-specific integer scaling and a documented read-only power example.
Three-phase DIN multimeter with built-in RS-485 Modbus, a shared DMG110/DMG210 register table and two model-specific traps: frequency scale and energy counter width.
Expandable 96 x 96 mm multimeter and power analyser from Lovato, read over Modbus RTU through an EXP1012 RS-485 module or Modbus TCP through an EXP1013 Ethernet module.
Colour-display power analysers from Lovato with built-in RS-485 (DMG7500), Ethernet (DMG8000) or both (DMG9000), read over Modbus RTU or Modbus TCP from one register map.
96 × 96 mm panel network meter with built-in RS-485 Modbus RTU, a float register map in three layouts and energy counters split into an overflow count and a kWh counter.
R32 monobloc heat pump paired with FTC6 PAC-IF072B-E, with best-effort temperature monitoring through a separately fitted MelcoBEMS MINI A1M+.
Read TriStar MPPT 60 battery and array measurements over Ethernet, using the controller’s own voltage and current scaling registers.
An inverter-controlled S-Series ground-source heat pump with an integrated water heater and built-in Modbus TCP/IP on supported software.
Read Nuvation G5 battery-stack status through SunSpec Modbus TCP while preserving the existing battery controller’s connection and safety responsibilities.
Direct-connected 80 A three-phase DIN-rail meter with four tariffs, RS-485 Modbus RTU and Float32 registers at hexadecimal addresses.
Nine-kilowatt K-generation split heat-pump kit comprising WH-SDC0309K3E5 indoor and WH-UDZ09KE5 outdoor units.
Read EEM-MA370 frequency, current, voltage and power over Modbus TCP, with documented addresses and a first-read decoding example.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents, including BACnet/IP guides. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Each device page explains the documented connection to Edge, what the device reports and how to check its setup. An Edge template is offered only where an exact reviewed import is available.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.