Aqara TH-S04D
The Aqara Climate Sensor W100: a temperature and humidity sensor with a 3.4-inch LCD and three buttons, rated ±0.2 °C and ±2 % RH. Edge reads it through the Gateway’s Zigbee radio.
- Temperature and humidity
Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
196 devices
The Aqara Climate Sensor W100: a temperature and humidity sensor with a 3.4-inch LCD and three buttons, rated ±0.2 °C and ±2 % RH. Edge reads it through the Gateway’s Zigbee radio.
A 36 mm square, coin-cell Zigbee sensor for room temperature, relative humidity and air pressure. Edge reads it through the Gateway’s Zigbee radio.
The Aqara Temperature and Humidity Sensor T1: a 36 mm square Zigbee 3.0 sensor for room temperature, relative humidity and air pressure on one CR2032 cell. Edge reads it through the Gateway’s Zigbee radio.
A wall-mounted Zigbee sensor for room temperature and relative humidity, running on two AA cells for up to five years at a five-minute reporting rate. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee PIR sensor that reports motion, room temperature and light level from one housing, with a 9 m detection range and two AA cells rated for three years. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee door contact that also measures room temperature and relative humidity, with writable calibration offsets, derived comfort values and diagnostic counters in the same device. Edge reads it through the Gateway’s Zigbee radio.
A Zigbee 3.0 room sensor that runs on light. Edge reads it through the Gateway’s Zigbee radio.
Model SBHT-203C: a 37 mm square coin-cell sensor with an SHT40 element, rated IP54 and for -20 to 60 °C. Edge reads it through the Gateway’s Zigbee radio.
SONOFF's original battery-powered Zigbee room sensor for temperature and relative humidity, 43 mm square and running on one CR2450 coin cell. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee 3.0 room sensor with a 2.8 inch LCD, rated at ±0.2 °C and ±2 % RH. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee 3.0 thermometer with a 1.5 m probe rated from -40 to 115 °C and an IP65 host with a 2.2-inch LCD. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee 3.0 sensor for room temperature and relative humidity, rated at ±0.2 °C and ±2 % RH, running for up to four years on one CR2477 coin cell. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee temperature and humidity sensor with a 2.9-inch e-ink screen. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee 3.0 temperature and humidity sensor in an IP65 housing with a breathable membrane and a 2.2-inch LCD. Edge reads it through the Gateway’s Zigbee radio.
A Zigbee 3.0 room sensor with a 41.5 × 38.0 mm LCD that shows temperature and humidity where it stands. Edge reads it through the Gateway’s Zigbee radio.
The battery Zigbee temperature and humidity sensor that reports the model identifier TS0201, most often a small round unit with an LCD. Edge reads it through the Gateway’s Zigbee radio.
A Zigbee presence sensor that also reports room temperature, humidity, light level and the distance to the person it detects, with a maximum detection distance you set from 0.75 to 9 m. Edge reads it through the Gateway’s Zigbee radio.
Smart temperature and humidity Sensor. Reports temperature and humidity with battery level. Battery powered.
Smart color temperature light controller. Exposes a switched output, dimming and colour temperature with internal temperature and a power-outage count. Firmware updates over the air.
Smart temperature and humidity detector. Reports temperature and humidity with battery level. Battery powered.
LED light with color temperature. Exposes a switched output, dimming, colour temperature and power-on behaviour.
LED light with color temperature. Exposes a switched output, dimming, colour temperature and power-on behaviour.
Bacchus Duck pool thermomemeter. Reports temperature with battery level. Battery powered.
Stove guard for safe cooking. Reports temperature, and exposes a switched output with battery level. Battery powered.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.