Shark 200 / 200T
Power meter. Reports current, power, cumulative energy, power factor and demand with device status.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Power meter. Reports current, power, cumulative energy, power factor and demand with device status.
Power meter. Reports voltage, current, power factor, demand and harmonic distortion with device status.
Power meter. Reports frequency with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Thermostat for electric floor. Exposes dimming, an operating mode and a child lock with field calibration.
ESH Plus Super TR RF PH. Reports power, and exposes a heating setpoint, an operating mode and a child lock with field calibration.
Power meter. Reports current, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports current, frequency and power factor with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports current, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, current, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports current, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports cumulative energy and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
The Distance sensor radar integrates the ELT2 sensor with ELSYS radar module, providing advanced distance measurement capabilities. With this device, you can also measure the ambient temperature, humidity, atmospheric pressure, and acceleration.
ELT2 Internal antenna is a wireless LoRaWAN® multifunctional sensor. Its IP67 rating makes it ideal for outdoor or extreme environments. ELT2 Internal antenna has two generic inputs and can thus simultaneously measure up to two external sensors.
ELT Lite is the ideal device to use together with an external sensor. Use it together with an electricity meter, flow meter, analog sensor, moisture sensor, or something else that fits your needs. ELT Lite has one generic input.
ELT-2 measures analog or digital signals. It is a 2-channel GPIO wireless transceiver and can also provide power to external sensors. Inside you will find four internal sensors for measuring temperature, humidity, acceleration and pressure.
ELT Ultrasonic is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions. Use the distance sensor to measure water level under a bridge, trash level in a container, and much more.
ELT Ultrasonic is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions. Use the distance sensor to measure water level under a bridge, trash level in a container, and much more.
ELT Ultrasonic snow is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions. Use the distance sensor to measure water level under a bridge, trash level in a container, and much more.
Multi-sensor with 2 external sensor inputs. Internal temperature, humidity, accelerometer and barometric pressure. External inputs support analog 0-10V, digital, pulse counter, DS18B20, ultrasonic distance, and water leak sensors.
Indoor multi-sensor with temperature, humidity, accelerometer, reed switch (door activity), and water leak detection.
Indoor desk occupancy sensor with temperature, humidity, and IR occupancy detection. Reports occupancy.
EMS Desk is equipped with a body heat sensor and can detect when somebody is standing or sitting by a desk, even if the person is still.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.