FK-BV05
Zigbee smart water valve with flow meter and temperature sensor. Exposes a switched output and valve position.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Zigbee smart water valve with flow meter and temperature sensor. Exposes a switched output and valve position.
Electricity meter interface 2 LED. Reports power and cumulative energy with battery level.
Electricity Meter Interface 2 P1. Reports voltage, current, power and cumulative energy.
Smart Cable - Power switch with power measurement. Reports voltage, current, power and cumulative energy, and exposes a switched output and power-on behaviour.
Smart DIN Relay 2. Reports voltage, current, power and cumulative energy, and exposes a switched output.
Temperature and contact sensor. Reports temperature and contact state with battery level.
Solar inverter. Reports voltage, current, power, cumulative energy and temperature with device status.
Solar inverter. Reports voltage, current, power, cumulative energy and temperature with device status.
Meter. Reports power and cumulative energy, in charge-point, grid and solar roles. Connects over Modbus TCP.
Meter. Reports power and cumulative energy, in charge-point, grid and solar roles. Connects over Modbus TCP.
Solar inverter. Reports voltage, current, power, cumulative energy and frequency with device status.
Futurehome Charge (EV Charger). Reports voltage, current, power and cumulative energy, and exposes a switched output with device status.
Thermostat. Reports cumulative energy, and exposes a switched output, an operating mode and a child lock with field calibration.
Monitoring of energy efficiency and energy cost allocation, operation of sub-range meters in large buildings, large plants, farms and urban areas are the best application for LoRa®-based CARLO GAVAZZI systems.
Plug-in smart switch. Reports power and cumulative energy, and exposes a switched output.
In-wall smart switch. Reports power and cumulative energy, and exposes a switched output.
Zigbee in-wall smart dimmer. Reports power and cumulative energy, and exposes a switched output, dimming and power-on behaviour.
Power meter. Reports voltage, current, power factor, demand and harmonic distortion with device status.
Outlink smart remote outlet. Exposes a switched output and power-on behaviour.
Switch actuator 1 channel with input. Exposes a switched output and power-on behaviour.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.