Shelly · MeteringS4DM-0010WW

Dimmer 0/1-10V PM Gen4. Reports voltage, current, power and cumulative energy, and exposes a switched output, dimming and power-on behaviour.

Shelly S4DM-0010WW device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
light light
state binary Read and write
brightness numeric Read and write 0–254
effect enum Write
power_on_behavior enum Read and write
power numeric Read W
voltage numeric Read V
current numeric Read A
energy numeric Read kWh
wifi_status text Read
ip_address text Read
dhcp_enabled binary Read
wifi_config composite Read and write
enabled binary Read and write
ssid text Read and write
password text Write
static_ip text Read and write
net_mask text Read and write
gateway text Read and write
name_server text Read and write
identify enum Write
action enum Read

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Shelly/S4DM-0010WW (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.