Aqara FP1E
A USB-powered Zigbee presence sensor using 60 GHz mmWave radar. Edge reads it through the Gateway’s Zigbee radio.
- Occupancy
Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
132 devices
A USB-powered Zigbee presence sensor using 60 GHz mmWave radar. Edge reads it through the Gateway’s Zigbee radio.
A two-channel Zigbee relay for back boxes and DIN rails. Edge reads it through the Gateway’s Zigbee radio.
A small battery-powered Zigbee contact sensor for doors and windows, 41 × 22 × 11 mm, with a 22 mm magnet gap and a CR1632 coin cell that Aqara rates for over two years. Edge reads it through the Gateway’s Zigbee radio.
A small battery-powered Zigbee passive infrared motion sensor with a light level reading. Edge reads it through the Gateway’s Zigbee radio.
Aqara’s Motion Sensor P1: a Zigbee 3.0 passive infrared sensor with a light sensor, three sensitivity settings and an adjustable detection interval. Edge reads it through the Gateway’s Zigbee radio.
A battery-powered Zigbee water leak sensor that sits on the floor and alarms when water reaches 0.5 mm across its probes, in an IP67 housing with a CR2032 cell Aqara rates for over two years. Edge reads it through the Gateway’s Zigbee radio.
A Schuko adapter plug that switches one appliance up to 10 A and 2300 W and reports its power and cumulative energy over Zigbee 3.0, with overload and overheat cut-off and a Zigbee router built in. Edge reads it through the Gateway’s Zigbee radio.
Aqara’s Radiator Thermostat E1: a Zigbee 3.0 valve head for M30 × 1.5 mm valves, with RA, RAV and RAVL adapters in the box, a 5 to 30 °C setpoint, window detection and an input for a room temperature from another sensor. Edge reads it through the Gateway’s Zigbee radio.
A small in-wall Zigbee 3.0 relay for loads up to 10 A and 2500 W resistive that needs a neutral, meters voltage, current, power and energy, and keeps an existing wall switch in use. Edge reads it through the Gateway’s Zigbee radio.
The Aqara Climate Sensor W100: a temperature and humidity sensor with a 3.4-inch LCD and three buttons, rated ±0.2 °C and ±2 % RH. Edge reads it through the Gateway’s Zigbee radio.
A battery Zigbee 3.0 monitor for total volatile organic compounds, temperature and humidity, with an E Ink display. Edge reads it through the Gateway’s Zigbee radio.
A hard-wired UK double socket, 13 A, with two switched outlets and two USB-C ports. Edge reads it through the Gateway’s Zigbee radio.
A 36 mm square, coin-cell Zigbee sensor for room temperature, relative humidity and air pressure. Edge reads it through the Gateway’s Zigbee radio.
The Aqara Temperature and Humidity Sensor T1: a 36 mm square Zigbee 3.0 sensor for room temperature, relative humidity and air pressure on one CR2032 cell. Edge reads it through the Gateway’s Zigbee radio.
Aqara’s Radiator Thermostat W600 is a battery-powered valve head for wet radiators. Edge reads it through the Gateway’s Zigbee radio.
Cube T1 Pro. Reports battery level and a power-outage count. Battery powered, with firmware updates over the air.
Vibration sensor. Reports vibration with battery level, internal temperature and a power-outage count. Battery powered.
Vibration sensor T1. Reports battery level. Battery powered, with firmware updates over the air.
Single switch module T1 (with neutral), CN. Reports voltage, current, power and cumulative energy, and exposes a switched output with internal temperature. Firmware updates over the air.
Single switch module T1 (no neutral), CN. Exposes a switched output.
Aqara Shutter Switch H2 EU. Reports cumulative energy, and exposes a switched output, valve position and a motorised cover. Firmware updates over the air.
Multi-state sensor P100. Reports contact state with battery level. Battery powered, with firmware updates over the air.
Presence sensor FP310. Firmware updates over the air.
Track light V1. Reports voltage, current, power and cumulative energy, and exposes a switched output, dimming, colour temperature and power-on behaviour.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.