ABB A44 112-100
CT/VT-connected DIN energy metering with RS-485: select the Steel variant, set transformer ratios and verify a literal-address voltage read.
- Energy meters
Device Directory
Meters, sensors and controllers, and how each connects to Edge.
96 device pages · 84 manufacturers with device pages
Device database results
96 devices
ABB D11 and D13 Modbus
D11 and D13 are direct-connected DIN-rail meters with different phase and current ratings. Their Modbus variants share an integer register map with four-register energy counters and explicit invalid-value markers.
- Energy meters
ABB M4M 20 Modbus
Panel energy monitoring with conventional CTs, two digital outputs and RS-485: exact M4M20RS485 setup and a scaled-integer Modbus read.
- Energy meters
ABB M4M 30 Modbus
M4M 30 Modbus is a panel network analyser for conventional 1 A or 5 A CTs, with RS-485, Bluetooth commissioning and four programmable I/O. Edge reads its scaled electrical values over Modbus RTU.
- Energy meters
Camille Bauer LINAX PQ5000
Monitor LINAX PQ5000 over Modbus TCP with a first frequency read, documented float decoding and local-interface checks.
- Energy meters
Carlo Gavazzi EM24-DIN
Read the EM24-DIN RS-485 meter with Edge: distinguish direct and CT inputs, import the 32-point map and verify signed, word-swapped measurements.
- Energy meters
Carlo Gavazzi EM111 S1
Single-phase direct-connected Modbus meter with a low-word-first integer read and a 32 A connection boundary.
- Energy meters
Carlo Gavazzi EM340 S1 X
Direct-connected 65 A three-phase energy metering with RS-485: exact S1 X setup, bidirectional measurement and a low-word-first register check.
- Energy meters
Carlo Gavazzi EM530 / EM540
Compare the 5 A CT-input EM530 with the direct-connected 65 A EM540, then configure RS-485, integer scaling and a read-only voltage check.
- Energy meters
Caterpillar EMCP 4.3 / 4.4
Monitor Cat EMCP 4.3 and 4.4 generator set controllers over the documented customer Modbus interface while keeping engine, breaker and paralleling control separate.
ComAp InteliGen 200
Connect InteliGen 200 monitoring over Modbus RTU or TCP using OEM interface documentation.
ComAp InteliGen 500 G2
Monitor an InteliGen 500 G2 over its documented Modbus RTU or TCP interface while leaving generator, breaker, synchronising and load-share control with the commissioned ComAp system.
ComAp InteliLite 4 AMF 20
Connect InteliLite 4 AMF 20 monitoring over Modbus RTU or TCP using OEM interface documentation.
ComAp InteliLite 4 AMF 25
Connect InteliLite 4 AMF 25 monitoring over Modbus RTU or TCP using OEM interface documentation.
ComAp InteliMains 210
Connect InteliMains 210 monitoring over Modbus RTU or TCP using OEM interface documentation.
ComAp InteliMains NT
Connect InteliMains NT monitoring over Modbus RTU using OEM interface documentation.
Cummins PowerCommand 3.3
Assess a Cummins PowerCommand 3.3 generator set controller for external monitoring while keeping the exact controller revision, Modbus data contract and every operational command outside the assumed scope.
Daikin Altherma 3 H HT ETVH16S18E6V7
Floor-standing E7 indoor heat-pump unit with an integrated 180 litre hot-water tank, paired here with the EPRA14DV37 outdoor unit.
Deep Sea Electronics DSE7320 MKII
Connect DSE7320 MKII monitoring over Modbus RTU using OEM interface documentation.
Deep Sea Electronics DSE8610 MKII
Connect DSE8610 MKII monitoring over Modbus RTU or TCP using OEM interface documentation.
Deep Sea Electronics DSE8620 MKII
Monitor a DSE8620 MKII through its documented Modbus RTU or Modbus TCP interface while keeping generator, breaker and load-share control with the commissioned control system.
DEIF AGC 150 Stand-alone
Monitor a DEIF AGC 150 Stand-alone generator controller through its documented Modbus server while keeping start, stop and breaker operation outside the Edge client.
Deye SUN-29.9-50K-SG01HP3-EU
A 29.9 to 50 kW three-phase hybrid-inverter family combining PV, high-voltage batteries, grid, load and optional generator operation.
- Inverters and charge controllers
Diehl Metering SHARKY 775 Modbus
Read thermal energy, power, flow and temperature from a SHARKY 775 fitted with Diehl's Modbus RTU module. Includes a documented first energy read.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Filter devices
How this directory works
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents, including BACnet/IP guides. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Compatibility
Each device page explains the documented connection to Edge, what the device reports and how to check its setup. An Edge template is offered only where an exact reviewed import is available.
Sources and images
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
- Devices
- 283
- Manufacturers
- 543
- Device pages
- 279
A device that is not listed
Tell us the manufacturer and model, and we'll look at its documentation.