Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
293 devices
A battery-powered LoRaWAN room sensor for CO₂, total VOC, temperature, humidity, air pressure, light and motion, sampling every 30 seconds and sending the averages every 10 minutes. Edge reads its decoded uplinks from your LoRaWAN network server.
A battery-powered LoRaWAN temperature and humidity sensor with a connector for an external probe, reporting every 20 minutes by default and logging up to 3,328 readings when the network is down. Edge reads its decoded uplinks from your LoRaWAN network server.
A wall-mounted LoRaWAN room sensor that measures CO₂, temperature, humidity, light and motion, runs on one or two AA lithium cells and is configured by NFC from a phone. Edge reads its decoded uplinks from your LoRaWAN network server.
A wall-mounted LoRaWAN room sensor with an E-ink screen that measures CO₂, temperature, humidity, TVOC, barometric pressure, light and occupancy. Edge reads its decoded uplinks from your LoRaWAN network server.
A mains-powered LoRaWAN room monitor with an E-ink screen that measures CO₂, PM2.5, PM10, TVOC, formaldehyde or ozone, temperature, humidity, pressure, light and occupancy. Edge reads its decoded uplinks from your LoRaWAN network server.
A battery-powered LoRaWAN pulse counter for water, gas and energy meters with a reed switch or passive pulse output. Edge reads its decoded uplinks from your LoRaWAN network server.
A battery-powered LoRaWAN temperature and humidity sensor in an IP67 enclosure, rated for -30 to 70 °C, reporting every 10 minutes by default on a 4000 mAh cell. Edge reads its decoded uplinks from your LoRaWAN network server.
A LoRaWAN transmitter with a 3-wire PT100 probe for pipes, plant, ovens and cold processes. Edge reads its decoded uplinks from your LoRaWAN network server.
A DIN-rail LoRaWAN controller with four digital or pulse inputs, two relay outputs, two 4-20 mA and two 0-10 V inputs, two PT100 inputs and an RS-485 port that polls up to 32 Modbus RTU registers. Edge reads its decoded uplinks from your LoRaWAN network server.
A coin-cell LoRaWAN leak sensor for floors, plant rooms and risers. Edge reads its decoded uplinks from your LoRaWAN network server.
A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor and indoor geolocation.
A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor and indoor geolocation. Compact and robust form factor, designed to resist harsh surroundings.
A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor and indoor geolocation. Versatile and multi-purpose with its small size and long battery life.
Immediate viewing of network coverage data (radio power and received signal strength). Reports temperature.
The Adeunis TEMP 4 Sensor is a LoRaWAN temperature sensor with an ambient temperature probe and a remote contact temperature probe. Reports temperature.
LoRaWAN Smart Condition Monitoring Sensor with built-in 3-axis vibration and temperature sensors, designed for industrial IoT applications. Reports temperature and vibration.
AstraLED Indoor LoRaWAN® device for measuring the indoor environment and signaling those through different colors. Reports temperature, humidity, CO₂ and volatile organic compounds.
AstraLED Mantis floor lamp sends information on brightness, air quality and noise level. Can get combined with other floor lamps for area-wide lighting control.
AstraLED Smartline lamp for measuring the indoor environment and signaling those through different colors. Reports temperature, humidity, CO₂ and volatile organic compounds.
The Asystom Sentinel sensor allows with its integrated vibration and ultrasound sensors to accurately detect all kinds of equipment drifts. It also includes ambient temperature monitoring, surface temperature monitoring and optional external sensors.
The room climate sensor continuously records selected parameters and measures, for example, the room temperature, the humidity and also the air quality by means of CO2 measurement.
CO2, Temperature and Humidity.
Open/Close, Temperature, Humidity, Vibration.
The Tabs PIR and Occupancy sensor detects occupancy or motion. Reports temperature and motion.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.
