Mumubiz · EnvironmentalTYZGTH1CH-D1RF

Smart switch with temperature/humidity sensor. Reports temperature and humidity, and exposes a switched output and a child lock with field calibration.

Mumubiz TYZGTH1CH-D1RF device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch - - -
state binary Read and write - -
power_outage_memory enum Read and write - -
child_lock binary Read and write - -
temperature numeric Read °C -
humidity numeric Read % -
temperature_calibration numeric Read and write °C -10-10
humidity_calibration numeric Read and write % -10-10
temperature_sensitivity numeric Read and write °C 0.1-1
humidity_sensitivity numeric Read and write % 1-10
manual_mode binary Read and write - -
auto_settings composite Read and write - -
enabled binary Read and write - -
temp_greater_then enum Read and write - -
temp_greater_value numeric Read and write °C -20-80
temp_lower_then enum Read and write - -
temp_lower_value numeric Read and write °C -20-80

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Mumubiz/TYZGTH1CH-D1RF (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.