Daikin Altherma 3 H HT ETVH16S18E6V7
Floor-standing E7 indoor heat-pump unit with an integrated 180 litre hot-water tank, paired here with the EPRA14DV37 outdoor unit.
Meters, sensors and controllers, and how each connects to Edge.
6 device pages · 100 manufacturers with device pages
6 devices
Floor-standing E7 indoor heat-pump unit with an integrated 180 litre hot-water tank, paired here with the EPRA14DV37 outdoor unit.
R32 monobloc heat pump paired with FTC6 PAC-IF072B-E, with best-effort temperature monitoring through a separately fitted MelcoBEMS MINI A1M+.
An inverter-controlled S-Series ground-source heat pump with an integrated water heater and built-in Modbus TCP/IP on supported software.
Nine-kilowatt K-generation split heat-pump kit comprising WH-SDC0309K3E5 indoor and WH-UDZ09KE5 outdoor units.
Eight-kilowatt single-phase R32 monobloc heat pump, with a Samsung ClimateHub or MIM-E03EN/CN control kit selected for the hydronic system.
Monitor WPL 25 AC through its WPM and a compatible ISG: Modbus TCP setup, temperature register candidates and independent heat/electricity metering.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents, including BACnet/IP guides. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Each device page explains the documented connection to Edge, what the device reports and how to check its setup. An Edge template is offered only where an exact reviewed import is available.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.