YOKIS · MeteringMFP-UP

Remote module for pilot wire heating system. Reports current, power and cumulative energy.

YOKIS MFP-UP device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
identify enum Write - -
power numeric Read W -
current numeric Read A -
energy numeric Read kWh -
power_failure_mode enum Read and write - -
actual_order enum Read - -
order_timer numeric Read and write - 0-4294967295
pre_order_timer numeric Read and write - 0-4294967295
timer_unit enum Read and write - -
led_mode enum Read and write - -
pilot_wire_relay_mode enum Read and write - -
order_scrolling_mode enum Read and write - -
order_number_supported enum Read and write - -
fallback_order enum Read and write - -
pilotwire_set_order enum Write - -
pilotwire_toggle_order enum Write - -
reset_to_factory_settings enum Write - -
relaunch_ble_advert enum Write - -

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. YOKIS/MFP-UP (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.