Zemismart · ControlZMS-206EU-3

Smart screen switch 3 gang. Exposes a switched output and a child lock.

Zemismart ZMS-206EU-3 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
backlight_mode binary Read and write
switch switch
state binary Read and write
state_l1 binary Read and write
state_l2 binary Read and write
state_l3 binary Read and write
backlight_brightness numeric Read and write % 0–100
child_lock binary Read and write
radar_config enum Read and write
switch_color_on enum Read and write
switch_color_off enum Read and write
indicator_status enum Read and write
delay_off_schedule enum Read and write
name_l1 text Read and write
name_l2 text Read and write
name_l3 text Read and write
relay_status_l1 enum Read and write
relay_status_l2 enum Read and write
relay_status_l3 enum Read and write
countdown_l1 numeric Read and write s 0–43200
countdown_l2 numeric Read and write s 0–43200
countdown_l3 numeric Read and write s 0–43200

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Zemismart/ZMS-206EU-3 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.