Sber · MeteringSBDV-00205

Smart Thermostat. Reports voltage, current, power and temperature, and exposes a heating setpoint and an operating mode with field calibration.

Sber SBDV-00205 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
emergency_overcurrent binary Read — —
emergency_overheat binary Read — —
emergency_no_load binary Read — —
sensor_error_remote_disconnected binary Read — —
sensor_error_local_disconnected binary Read — —
sensor_error_short_circuit binary Read — —
status_heat_inefficient binary Read — —
status_antifrost binary Read — —
status_invalid_time binary Read — —
keypad_lockout enum Read and write — —
climate climate — — —
occupied_heating_setpoint numeric Read and write °C 1–50
local_temperature numeric Read °C —
system_mode enum Read and write — —
local_temperature_calibration numeric Read and write °C -2.5–2.5
control_sequence_of_operation enum Read and write — —
running_mode enum Read — —
running_state enum Read — —
clear_weekly_schedule enum Write — —
programming_operation_mode enum Read and write — —
abs_min_heat_setpoint_limit numeric Read °C —
abs_max_heat_setpoint_limit numeric Read °C —
min_heat_setpoint_limit numeric Read and write °C 1–35
max_heat_setpoint_limit numeric Read and write °C 5–50
weekly_schedule composite Read and write — —
sunday text Read and write — —
monday text Read and write — —
tuesday text Read and write — —
wednesday text Read and write — —
thursday text Read and write — —
friday text Read and write — —
saturday text Read and write — —
min_local_temperature_limit numeric Read and write °C 1–35
max_local_temperature_limit numeric Read and write °C 5–50
heating_hysteresis numeric Read and write °C 1–10
device_temperature numeric Read °C —
temperature numeric Read °C —
voltage numeric Read V —
current numeric Read A —
power numeric Read W —
upper_current_threshold numeric Read and write mA 100–16000
temperature_threshold numeric Read and write °C -200–200
sensor_type enum Read and write — —
sensor_mode enum Read and write — —
remote_temperature numeric Read and write °C -273.15–327.67
remote_temperature_calibration numeric Read and write °C -12.8–12.7
remote_sensor_timeout numeric Read and write — 1–65535
output_mode enum Read and write — —
brightness_operations_mode numeric Read and write — 0–1000
brightness_steady_mode numeric Read and write — 0–1000
identify enum Write — —
rtc_status list Read — —
serial_number text Read — —
resets_count numeric Read — —
uptime numeric Read s —
button_clicks_count_1 numeric Read — —
button_clicks_count_2 numeric Read — —
button_clicks_count_3 numeric Read — —
relay_switches_count_1 numeric Read — —

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Sber/SBDV-00205 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.