ENGO · MeteringECB62-ZB

Control box for underfloor heating system. Reports voltage.

ENGO ECB62-ZB device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
pump_delay_time enum Read and write
zone_1 binary Read
zone_2 binary Read
zone_3 binary Read
zone_4 binary Read
zone_5 binary Read
zone_6 binary Read
zone_a binary Read
zone_b binary Read
boiler_state binary Read
pump_state binary Read
zone_1_linked binary Read
zone_2_linked binary Read
zone_3_linked binary Read
zone_4_linked binary Read
zone_5_linked binary Read
zone_6_linked binary Read
zone_a_name text Read and write
zone_b_name text Read and write
zone_1_name text Read and write
zone_2_name text Read and write
zone_3_name text Read and write
zone_4_name text Read and write
zone_5_name text Read and write
zone_6_name text Read and write
voltage numeric Read V

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. ENGO/ECB62-ZB (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.