ENGO · HVACE25-230

Smart thermostat. Exposes a switched output, an operating mode and a child lock with field calibration.

ENGO E25-230 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
state binary Read and write
climate climate
system_mode enum Read and write
current_heating_setpoint numeric Read and write °C 5–35
local_temperature numeric Read °C
local_temperature_calibration numeric Read and write °C -3.5–3.5
running_state enum Read
preset enum Read and write
control_algorithm enum Read and write
max_temperature numeric Read and write °C 5–45
min_temperature numeric Read and write °C 5–45
child_lock binary Read and write
valve_protection binary Read and write
relay_mode enum Read and write
backlight numeric Read and write % 0–100
frost_set numeric Read and write °C 5–17

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. ENGO/E25-230 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.