EFEKTA · MeteringEFEKTA_T1_v2_LR

Temperature sensors with a signal amplifier. External DS18b20 sensor. Simple Thermostat. Reports temperature with battery level.

EFEKTA EFEKTA_T1_v2_LR device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
identify enum Write - -
temperature numeric Read °C -
battery numeric Read % 0-100
voltage numeric Read mV -
battery_low binary Read - -
reading_interval numeric Read and write sec 10-360
tx_radio_power enum Read and write - -
smart_sleep binary Read and write - -
uptime numeric Read Hours -
resolution enum Read and write - -
config_report_enable binary Read and write - -
comparison_previous_data binary Read and write - -
enabling_temperature_control binary Read and write - -
temperature_actions enum Read and write - -
high_temperature numeric Read and write °C -50-120
low_temperature numeric Read and write °C -50-120

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. EFEKTA/EFEKTA_T1_v2_LR (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.