SolarEdge: Optimised solar inverters, site metering and DC-coupled storage

SolarEdge supplies solar inverters, power optimizers, energy meters and storage, with documented monitoring interfaces and model-specific backup systems.

Summary

Best for
Solar projects using a coordinated inverter, optimisation and storage architecture with measured site energy flows.
Less suited to
Assuming an attached battery automatically supplies backup without the specified inverter and backup interface.
Deployment
Power optimizers and inverter on the PV side, an optional site meter, and compatible DC-coupled battery equipment.
Data in
PV production, site meter readings and supported inverter data; SunSpec access depends on device configuration.

Overview

SolarEdge combines PV power conversion with module-level optimisation, site metering and storage. Its company overview places inverters and power optimizers alongside batteries, charging and energy-management software. The useful system boundary is the complete path from the array through the inverter to the building and grid, rather than the inverter's production figure alone.

A separate energy meter provides the site measurements needed to understand consumption and export. The Home Battery 400V adds DC-coupled storage for specified combinations. These components answer different questions: how much the array produces, how the site exchanges energy with the grid, and how much energy can be stored for later use.

Offering

The Energy Meter with Modbus Connection uses current transformers selected for the installation and communicates over RS485 to a SolarEdge inverter or Commercial Gateway. SolarEdge states that current transformers must be ordered separately. The meter is therefore part of the measurement arrangement, not simply a software option that creates consumption data from PV production.

The Home Battery 400V stores energy through direct DC coupling. The reviewed regional page permits up to three batteries per inverter in supported arrangements. It also distinguishes ordinary storage from backup: backup applications require the specified Home Hub inverter and Home Backup Interface, with regional availability and installation requirements applying.

Products and platforms

  1. SunSpec-supported SolarEdge inverters

    Inverter monitoring interface

    SetApp-configured inverters and qualifying LCD firmware support the documented SunSpec logging interface.6

  2. Designer

    PV design software

    Online SolarEdge system design tool retained from the official software catalogue.7

  3. PV Monitoring Platform

    Monitoring software

    Module-level PV performance monitoring and remote maintenance through browser or phone.7

  4. SolarEdge Go

    Installer software

    Installer application in the current official software catalogue.7

  5. mySolarEdge

    Home energy application

    Remote monitoring and management of SolarEdge home energy systems.7

  6. SolarEdge Nexis Inverter

    Residential inverter

    Nexis inverter offered in the German-market product material; availability and configuration must follow the regional documentation.8

  7. SolarEdge Nexis Battery

    Residential battery

    Modular battery paired with the Nexis system in German-market product material.8

  8. SolarEdge ONE for C&I

    Commercial energy software

    Commercial-site platform for monitoring, analysis and operations, with site access controlled by account roles.9

  9. ONE Controller for C&I

    Site gateway

    On-site gateway for commercial energy infrastructure and supported SolarEdge system control.10

  10. SolarEdge Home Network

    Device network

    Wireless mesh network connecting supported SolarEdge Home equipment.10

  11. Wireless Gateway

    Communications gateway

    Gateway extending SolarEdge monitoring and control arrangements.10

  12. Environmental sensors

    PV performance sensors

    Sensors for irradiance, temperature and wind speed in site performance monitoring.11

Technology

SolarEdge's SunSpec logging technical note describes Modbus RTU over RS485 and Modbus TCP over Ethernet. The indexed June 2025 version states that supported SetApp inverters and qualifying LCD firmware can expose SunSpec data, while limiting the system to a single external Modbus leader. This is relevant when a site already has a third-party logger.

That monitoring path is separate from the energy meter's RS485 connection and from the battery power connection. A data model for inverter production does not establish every battery or control function. The selected inverter model and firmware determine the applicable logging configuration and data map; commissioning should record these alongside the chosen physical connection.

Markets

A building that already has PV generation may still lack visibility of its total demand. SolarEdge's metering page addresses this distinction by collecting site consumption and import/export information. That measurement supports decisions about when loads operate and whether stored solar energy would serve demand later in the day.

The battery product page describes both on-grid and backup applications, but those are different system configurations. A storage purchase intended to maintain supply during an outage must include the compatible backup equipment, while a self-consumption installation may have a different objective. The regional compatibility details are therefore more informative than the battery capacity or efficiency headline alone.

Company

SolarEdge's company history dates the business to 2006. Its privacy policy identifies the headquarters at HaMada 1 in Herzliya, Israel, while the contact page lists its wider office presence. The company profile covers its solar and energy-management products without assigning one country's product availability to every market.

For an engineering comparison, the manufacturer's regional product pages and knowledge-centre documents serve complementary roles. Product pages explain the intended system combinations; technical notes define supported interfaces and commissioning details. The Home Battery 400V page, for example, separates supported storage combinations from the additional hardware needed for backup, and identifies regional limits on some three-phase combinations.

Alternatives in renewable energy equipment

What to look for in renewable energy equipment

References

  1. SolarEdge company and history (opens in a new tab)
  2. SolarEdge headquarters in privacy policy (opens in a new tab)
  3. Energy Meter with Modbus Connection (opens in a new tab)
  4. SolarEdge Home Battery 400V (opens in a new tab)
  5. SolarEdge office locations (opens in a new tab)
  6. SunSpec logging technical note, indexed official excerpt (opens in a new tab) (PDF)
  7. solaredge official product evidence source-111 (opens in a new tab)
  8. solaredge official product evidence source-112 (opens in a new tab)
  9. solaredge official product evidence source-113 (opens in a new tab)
  10. solaredge official product evidence source-114 (opens in a new tab)
  11. solaredge official product evidence source-115 (opens in a new tab)

This profile does not imply a commercial relationship with SolarEdge and may contain inaccuracies.