Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
312 devices
Panel power meters for 1 A or 5 A current transformers, with Modbus RTU on RS-485 or Modbus TCP on Ethernet. Edge reads them through a Modbus interface, the Gateway’s serial port or the site network.
Connect the 120 A Shelly Pro 3EM to Edge over Modbus TCP. A read-only triphase map, exact register offsets and a worked voltage check.
Three-phase DIN-rail power meter with Modbus TCP on Ethernet or Modbus RTU on RS-485. Edge reads it over the site network, a Modbus interface or the Gateway’s serial port.
Two three-phase DIN-rail energy meters on one register map: the EM340 connects directly up to 65 A and powers itself, the EM330 reads 5 A current transformers. Edge reads it through a Modbus interface, the Gateway’s serial port or the site network.
A 96 × 96 mm panel meter with a touchscreen that measures energy, power and power quality through Socomec's own plug-in current sensors, which it recognises by type and rating. Edge reads it through a Modbus interface, the Gateway’s serial port or the site network.
Power meter. Reports voltage, current, power, cumulative energy, frequency and demand. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, current, cumulative energy and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports current and cumulative energy. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, current, power, cumulative energy and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in charge-point, grid and solar roles. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, cumulative energy and frequency with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, current, power, cumulative energy and frequency with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, cumulative energy and frequency with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Power meter. Reports voltage, current, power, cumulative energy and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in a battery storage role. Connects over Modbus TCP.
Power meter. Reports voltage, current, power, frequency, power factor and demand. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in a solar role. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus TCP.
Energy meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus TCP.
Energy meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus TCP.
Power meter. Reports temperature with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Energy meter. Reports power and cumulative energy, in a solar role. Connects over Modbus RTU (RS-485) and Modbus TCP.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.
