Namron · Metering4512752/4512753

Touch thermostat 16A 2.0. Reports voltage, current, power and cumulative energy, and exposes a switched output, an operating mode and a child lock with field calibration.

Namron 4512752/4512753 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
mode enum Read and write
regulator_period enum Read and write
regulator_set_point numeric Read and write % 0–95
climate climate
system_mode enum Read and write
preset enum Read and write
local_temperature numeric Read °C
local_temperature_calibration numeric Read and write °C -9–9
running_state enum Read
current_heating_setpoint numeric Read and write °C 5–35
current numeric Read A
power numeric Read W
energy numeric Read kWh
voltage numeric Read V
sensor enum Read and write
local_temperature_floor numeric Read °C
child_lock binary Read and write
switch switch
window_detection binary Read and write
hysteresis numeric Read and write °C 1–9
max_temperature_protection numeric Read and write °C 20–95

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Namron/4512752/4512753 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.