Namron · Metering4512758

Zigbee thermostat 16A. Reports current, power and cumulative energy, and exposes a switched output, a heating setpoint, an operating mode and a child lock with field calibration.

Namron 4512758 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
climate climate
local_temperature numeric Read °C
occupied_heating_setpoint numeric Read and write °C 0–40
local_temperature_calibration numeric Read and write °C -10–10
system_mode enum Read and write
running_state enum Read
child_lock binary Read and write
switch switch
state binary Read and write
power numeric Read W
current numeric Read A
energy numeric Read kWh
away_mode binary Read and write
window_open_check binary Read and write
window_open binary Read and write
backlight_level numeric Read and write % 0–100
backlight_onoff binary Read and write
sensor_mode enum Read and write
pi_heating_demand numeric Read and write % 0–100
regulator_cycle numeric Read and write min 1–30

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Namron/4512758 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.