EFEKTA · MeteringEFEKTA_PST_DUO_V1

Water, gas smart pressure monitor with two sensors. Reports battery level.

EFEKTA EFEKTA_PST_DUO_V1 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
pressure_1 numeric Read kPa
bar_1 numeric Read bar
psi_1 numeric Read psi
temperature_1 numeric Read °C
pressure_offset_1 numeric Read and write kPa -100–100
raw_temperature_calibration_1 numeric Read and write raw unit -8192–8192
range_1 enum Read and write
pressure_2 numeric Read kPa
bar_2 numeric Read bar
psi_2 numeric Read psi
temperature_2 numeric Read °C
pressure_offset_2 numeric Read and write kPa -100–100
raw_temperature_cal_2 numeric Read and write raw unit -8192–8192
range_2 enum Read and write
battery numeric Read % 0–100
voltage numeric Read mV
battery_low binary Read
uptime numeric Read Hours
reading_interval numeric Read and write sec 10–360
smart_sleep binary Read and write
config_report_enable binary Read and write
comparison_previous_data binary Read and write

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. EFEKTA/EFEKTA_PST_DUO_V1 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.