SZ-DWS04
Magnetic door & window contact sensor. Reports temperature and contact state with battery level.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Magnetic door & window contact sensor. Reports temperature and contact state with battery level.
Magnetic door & window contact sensor. Reports temperature and contact state with battery level.
Telstra smart plug. Reports voltage, current, power and cumulative energy, and exposes a switched output.
Telstra smart plug 2. Reports power, and exposes a switched output.
Telstra smart plug. Reports power and cumulative energy, and exposes a switched output.
Magnetic door & window contact sensor. Reports temperature and contact state with battery level.
Meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus RTU (RS-485).
Meter. Reports power and cumulative energy, in grid, solar and battery storage roles. Connects over Modbus RTU (RS-485).
Dimmer Gen4. Reports voltage, current, power and cumulative energy, and exposes a switched output, dimming and power-on behaviour.
Dimmer 0/1-10V PM Gen4. Reports voltage, current, power and cumulative energy, and exposes a switched output, dimming and power-on behaviour.
Plug US Gen4. Reports voltage, current, power and cumulative energy, and exposes a switched output.
BLU H&T display Zigbee. Reports temperature and humidity with battery level.
Humidity & temperature sensor. Reports temperature and humidity with battery level.
Thermostatic radiator valve. Exposes a heating setpoint and an operating mode with battery level and field calibration.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.