Ubisys · MeteringD1

Universal dimmer D1. Reports power and cumulative energy, and exposes a switched output and dimming.

Ubisys D1 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
light light
state binary Read and write
brightness numeric Read and write 0–254
level_config composite Read and write
on_off_transition_time numeric Read and write
on_level numeric Read and write 1–254
execute_if_off binary Read and write
current_level_startup numeric Read and write 1–254
power numeric Read W
energy numeric Read kWh
ballast_minimum_level numeric Read and write 1–254
ballast_maximum_level numeric Read and write 1–254
minimum_on_level numeric Read and write 0–255
capabilities_forward_phase_control binary Read and write
capabilities_reverse_phase_control binary Read and write
capabilities_reactance_discriminator binary Read and write
capabilities_configurable_curve binary Read and write
capabilities_overload_detection binary Read and write
status_forward_phase_control binary Read and write
status_reverse_phase_control binary Read and write
status_overload binary Read and write
status_capacitive_load binary Read and write
status_inductive_load binary Read and write
mode_phase_control enum Read and write
identify_default enum Write
action enum Read

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Ubisys/D1 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.