Futurehome · MeteringCharge

Futurehome Charge (EV Charger). Reports voltage, current, power and cumulative energy, and exposes a switched output with device status.

Futurehome Charge device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
status enum Read
charging_start enum Write
charging_stop enum Write
charging_pause enum Write
setpoint_charging_current numeric Read and write A 6–32
auto_charge binary Read and write
cable_locked binary Read and write
state enum Read and write
charging_current_limit numeric Read and write A 6–32
session_energy numeric Read kWh
energy_meter_start numeric Read kWh
energy_meter_now numeric Read kWh
charging_duration numeric Read s
power numeric Read W
voltage numeric Read V
current numeric Read A
energy numeric Read kWh
voltage_phase_b numeric Read V
voltage_phase_c numeric Read V
current_phase_b numeric Read A
current_phase_c numeric Read A
is_charging binary Read
charging_start_datetime text Read
charging_end_datetime text Read
is_plug_connected binary Read
connected_start_datetime text Read
connected_end_datetime text Read

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Futurehome/Charge (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.