Adeunis PULSE
A battery-powered LoRaWAN pulse counter for water, gas, electricity and heat meters. Edge reads its decoded uplinks from your LoRaWAN network server.
- Pulse and I/O
Device Directory
Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
Device database results
4 devices
Milesight EM300-DI
A battery-powered LoRaWAN pulse counter for water, gas and energy meters with a reed switch or passive pulse output. Edge reads its decoded uplinks from your LoRaWAN network server.
- Pulse and I/O
Milesight UC300
A DIN-rail LoRaWAN controller with four digital or pulse inputs, two relay outputs, two 4-20 mA and two 0-10 V inputs, two PT100 inputs and an RS-485 port that polls up to 32 Modbus RTU registers. Edge reads its decoded uplinks from your LoRaWAN network server.
- Pulse and I/O
Milesight EM300-DI
Pulse Counter.
- Pulse and I/O
No devices match your filters
Try a broader model fragment, manufacturer or application.
Filter devices
How this directory works
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Compatibility
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Sources and images
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
- Devices
- 2,960
- Manufacturers
- 543
- Device pages
- 136
A device that is not listed
Tell us the manufacturer and model, and we'll look at its documentation.