Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Double GPO power point with USB-C and energy monitoring (also sold as Smartlink Automation 'Glass smart double power point with USB-C'). Reports voltage, current, power and cumulative energy, and exposes a switched output, a child lock and power-on behaviour.
Zigbee dimmer module with power monitoring. Reports voltage, current and power, and exposes a switched output and dimming.
2 x socket + 1 x light with master switch and metering. Reports voltage and current, and exposes a switched output.
1 gang switch with power meter. Reports voltage, current and power, and exposes a switched output and power-on behaviour.
Human presence sensor with fall function. Reports light level and occupancy.
Bidirectional energy meter with 80A current clamp. Reports voltage, current, power and cumulative energy.
PM2.5 air quality sensor. Reports temperature, humidity, CO₂ and particulates.
Temperature and humidity sensor. Reports temperature and humidity with battery level and field calibration.
Smart energy monitor for 3P+N system. Reports power, cumulative energy and power factor.
Smart energy monitor for 3P+N system. Reports power, cumulative energy and power factor.
Smart energy monitor for 2P+N system. Reports power, cumulative energy and power factor.
Smart energy monitor for 2P+N system. Reports power, cumulative energy and power factor.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.
