Documentation

Datasheets, user guides and API references for EpiSensor Gateways, sensors and meter interfaces.

Something missing?

Documentation library

20 documents

Current products

Datasheet

Gateway

Runs Edge on Ubuntu Core. Zigbee, Bluetooth and LoRaWAN radios, dual Ethernet, optional Cellular and GNSS, up to 250 devices.

ZGW-20 · EPI-288 · Rev 00 · 2.2 MB (opens in a new tab) PDF, opens in a new tab
Datasheet

Wireless 3-Phase Electricity Monitor

Three-phase electricity monitor, Class 0.5S with its current sensors. Split-core CTs or Rogowski coils.

ZEM-65 · EPI-221 · Rev 00 · 958 KB (opens in a new tab) PDF, opens in a new tab
Datasheet

Demand Response Controller

Demand response controller with three-phase metering, grid-frequency monitoring, and a relay or Modbus set-point output.

ZDR-2X · EPI-211 · Rev 04 · 1.2 MB (opens in a new tab) PDF, opens in a new tab
Datasheet

Probe Temperature Sensor

Battery-powered temperature sensor with one or two external probes. IP67, probes IP68.

TES-2X · EPI-196 · Rev 00 · 608 KB (opens in a new tab) PDF, opens in a new tab
Datasheet

Analogue Signal Sensor

Analogue signal sensor for 4-20 mA and 0-10 V instruments.

ZIO-2X / ZVO-2X · EPI-231 · Rev 00 · 494 KB (opens in a new tab) PDF, opens in a new tab
Datasheet

Modbus Interface

Reads Modbus RTU devices over RS-485 and sends their registers to the Gateway.

ZMB-3X · EPI-195 · Rev 00 · 502 KB (opens in a new tab) PDF, opens in a new tab
Datasheet

Pulse Counter

Pulse counter for water, gas, heat and electricity meters with a pulse output.

ZPC-2X · EPI-072 · Rev 00 · 525 KB (opens in a new tab) PDF, opens in a new tab
Datasheet

M-Bus Interface

Reads one wired M-Bus meter and sends its energy, volume and temperature records to the Gateway over the wireless network.

ZHM-21 · 465 KB (opens in a new tab) PDF, opens in a new tab
User guide

Static IP Configuration (Linux)

Set a static IP address for the Gateway from a Linux workstation.

EPI-263 · Rev 00 · 54 KB (opens in a new tab) PDF, opens in a new tab
User guide

Static IP Configuration (Windows)

Set and verify a Windows 11 IPv4 address for a direct ZGW-20 management connection, then restore DHCP safely.

EPI-261 · Rev 01 · Sep 2026 · 21 KB (opens in a new tab) PDF, opens in a new tab
User guide

Static IP Configuration (macOS)

Set a static IP address for the Gateway from a Mac workstation.

EPI-262 · Rev 00 · 109 KB (opens in a new tab) PDF, opens in a new tab

Discontinued products

These products are no longer sold. Their documents stay here for sites that still run them, and support can help with an installed system.