ZN2S-RS02E
Two gang switch with colored backlight modes. Exposes a switched output, a child lock and power-on behaviour.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Two gang switch with colored backlight modes. Exposes a switched output, a child lock and power-on behaviour.
Treatlife human presence sensor. Reports light level and occupancy with battery level.
2 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
3 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
4 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
Smart switch (4 gang + 2 scene) with backlight and neutral wire. Exposes a switched output and power-on behaviour.
Weather station with clock, internal/external temperature and humidity. Reports temperature and humidity.
Wall thermostat. Exposes an operating mode and a child lock with field calibration.
24G MmWave radar human presence motion sensor. Reports light level and distance, and exposes a switched output.
24G MmWave radar human presence motion sensor. Reports light level and distance, and exposes a switched output.
24G MmWave radar human presence motion sensor (added distance switch).
Universal dimmer D1. Reports power and cumulative energy, and exposes a switched output and dimming.
Heating regulator. Exposes a heating setpoint and an operating mode with battery level.
Power switch S1. Reports power and cumulative energy, and exposes a switched output and power-on behaviour.
Power switch S1-R. Reports power and cumulative energy, and exposes a switched output and power-on behaviour.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.