Aqara · MeteringWS-K03E

Light Switch H2 US (2 Buttons, 2 Channels). Reports power, and exposes a switched output and power-on behaviour.

Aqara WS-K03E device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
power numeric Read W -
switch switch - - -
state_up binary Read and write - -
state_down binary Read and write - -
device_temperature numeric Read °C -
power_outage_count numeric Read - -
power_on_behavior enum Read and write - -
operation_mode_up enum Read and write - -
operation_mode_down enum Read and write - -
lock_relay_up binary Read and write - -
lock_relay_down binary Read and write - -
led_disabled_night binary Read and write - -
flip_indicator_light binary Read and write - -
mode_switch enum Read and write - -
action enum Read - -

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Aqara/WS-K03E (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.