EEM-MA3xx
Power meter. Reports voltage, current, power, cumulative energy and frequency.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Power meter. Reports voltage, current, power, cumulative energy and frequency.
Zigbee air conditioner controller for Midea / Royal Clima / Hommyn / Neoline (ESP32-H2/C6). Exposes a heating setpoint, an operating mode and a fan mode.
Spruce temperature and moisture sensor. Reports temperature and humidity with battery level.
Lisa zone thermostat. Exposes a heating setpoint and an operating mode with battery level.
Plug power socket on/off with power consumption monitoring. Reports power and cumulative energy, and exposes a switched output.
Emma Wired Pro / Emma Wireless. Reports temperature and humidity, and exposes a heating setpoint and an operating mode with battery level and field calibration.
The PlacePod parking sensor is finely tuned to reliably detect parking events and at the same time use as little energy as possible. With its powerful magnetic sensor, it works stably even with temperature fluctuations.
Solar inverter. Reports voltage, current, power, cumulative energy and frequency with device status. Connects over Modbus RTU (RS-485) and Modbus TCP.
Thermostat radiator valve. Exposes a child lock with battery level and field calibration.
Pilot wire heating module. Reports humidity, and exposes a switched output, a heating setpoint, an operating mode and a child lock with field calibration.
Power meter. Reports voltage, current, power, cumulative energy, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
Pressac's LoRaWAN® CT Clamp sensor monitors electrical current on up to three channels, providing energy usage data for IoT platforms to help reduce consumption and improve efficiency.
Pressac's LoRaWAN® Indoor air quality sensor accurately measures the environmental conditions providing essential data for IoT platforms for healthier, more efficient buildings.
Pressac's LoRaWAN® Room Conditions Sensor accurately measures occupancy, light, sound, temperature and humidity, providing essential data for IoT platforms for healthier, more efficient buildings.
Electric oil-filled radiator. Exposes a heating setpoint and an operating mode with field calibration.
Battery powered retrofit valve. Exposes a switched output with battery level and device status.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.