Device Directory
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Device database results
AC01353010G
SMART+ Motion Sensor. Reports temperature and occupancy with battery level.
ATMS10013Z3
Zigbee 3 Phase Meter. Reports power, cumulative energy and power factor.
MATE3S
Power meter. Reports voltage, current, power, cumulative energy, frequency and power factor. Connects over Modbus RTU (RS-485) and Modbus TCP.
OB115
Power meter. Reports voltage, current, power, cumulative energy and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
OB418
Power meter. Reports voltage, current, power and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
OB737
Power meter. Reports voltage, current, power, cumulative energy and frequency. Connects over Modbus RTU (RS-485) and Modbus TCP.
AC201
HVAC controller/IR blaster. Exposes a heating setpoint, an operating mode and a fan mode.
CB432
32A/63A power circuit breaker. Reports power and cumulative energy, and exposes a switched output and power-on behaviour.
PCT504
HVAC fan coil. Reports humidity and occupancy, and exposes a heating setpoint, an operating mode and a fan mode.
PCT512
Thermostat. Reports humidity and occupancy, and exposes a heating setpoint and an operating mode.
PIR323-PTH
Multi-sensor. Reports temperature, humidity and occupancy.
SLC611
Zigbee smart switch with power metering. Reports voltage, current, power, cumulative energy and power factor, and exposes a switched output and power-on behaviour.
SLC631
Smart plug with doorbell press indicator. Reports contact state, and exposes a switched output.
THS317
Temperature and humidity sensor. Reports temperature and humidity with battery level.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Filter devices
How this directory works
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
Connection evidence
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Publication boundaries
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.
- Devices
- 2958
- Manufacturers
- 543
- Device guides
- 5