SDM01V1.5
Smart energy monitor for 3P+N system. Reports power, cumulative energy and power factor.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Smart energy monitor for 3P+N system. Reports power, cumulative energy and power factor.
3 channel USB switch. Exposes a switched output and power-on behaviour.
Human presence sensor 2-gang smart switch. Exposes a switched output.
Human sresence sensor 1-gang smart switch. Exposes a switched output.
Human presence sensor 3-gang smart switch. Exposes a switched output.
Semicom touch panel: 2 switches + 2 shutters. Exposes a switched output.
Smart thermostat for electric radiator with pilot wire. Reports voltage, current, power and cumulative energy, and exposes a switched output, an operating mode and a child lock with field calibration.
Temperature & humidity smart switch 16A. Reports temperature and humidity, and exposes a switched output.
Smoke detector with temperature and humidity sensor. Reports temperature and humidity.
Smart air conditioner. Reports power and cumulative energy, and exposes a switched output, an operating mode and a fan mode.
Thermostatic radiator valve. Exposes an operating mode and a child lock with battery level.
Thermostatic radiator valve. Exposes a child lock with battery level and field calibration.
Din smart relay (without power monitoring). Exposes a switched output.
Thermostat radiator valve. Exposes a switched output, a valve, an operating mode and a child lock with battery level and field calibration.
Heating/cooling thermostat with fan control. Exposes an operating mode and a fan mode with field calibration.
Smart WiFi Zigbee chlorine meter. Reports temperature with battery level.
Beok wall thermostat (battery powered). Exposes an operating mode and a child lock with battery level and field calibration.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.