Meters, sensors and controllers, and how each connects to Edge.
136 device pages · 37 manufacturers with device pages
210 devices
Thermostatic radiator valve. Reports room temperature, heating state and heating demand, and exposes a heating setpoint, an operating mode, frost protection and a child lock with field calibration and a low-battery alarm.
Thermostatic radiator valve. Reports room temperature, and exposes a heating setpoint, an operating mode, heating presets, frost protection and a child lock with battery level, field calibration and a low-battery alarm. Battery powered.
Thermostatic radiator valve. Reports room temperature, heating state and heating demand, and exposes a heating setpoint, an operating mode, frost protection and a child lock with field calibration and a low-battery alarm.
Thermostatic radiator valve.
Fan coil unit (FCU) thermostat. Reports room temperature, and exposes a heating setpoint, an operating mode, heating presets, a fan mode and a child lock with field calibration and a low-battery alarm.
ThermoSphere thermostat. Reports room temperature, and exposes a heating setpoint, an operating mode and frost protection.
Wall-mount thermostat for 2-pipe fan-coil unit.
Wall-mount thermostat. Reports room temperature and heating state, and exposes a heating setpoint, an operating mode, heating presets, frost protection and a child lock with field calibration.
Wall thermostat with humidity sensor. Reports humidity, room temperature and heating state, and exposes a heating setpoint, an operating mode, heating presets and a child lock with field calibration.
Wall-mount thermostat. Reports room temperature and heating state, and exposes a heating setpoint, an operating mode and heating presets.
Wall thermostat. Reports room temperature and heating state, and exposes a heating setpoint, an operating mode, heating presets, frost protection and a child lock with field calibration.
Pilot wire heating module. Reports power and cumulative energy, and exposes a switched output and power-on behaviour. Firmware updates over the air.
ViCare radiator thermostat valve. Reports room temperature and open windows, and exposes a heating setpoint, an operating mode and a keypad lock with battery level. Battery powered.
Vimar IoT thermostat. Reports room temperature, and exposes a heating setpoint, a cooling setpoint and an operating mode.
Thermostatic radiator valve. Reports room temperature, and exposes a switched output, a heating setpoint, an operating mode, heating presets, open-window detection and a child lock with field calibration.
Thermostatic radiator valve. Reports room temperature, and exposes a switched output, a heating setpoint, open-window detection, frost protection and a child lock with battery level and field calibration. Battery powered, with firmware updates over the air.
Remote module for pilot wire heating system. Reports current, power and cumulative energy.
Thermostat. Reports voltage, room temperature and heating state, and exposes a heating setpoint, a cooling setpoint, an operating mode and a fan mode with field calibration. Firmware updates over the air.
No devices match your filters
Try a broader model fragment, manufacturer or application.
Built from public Zigbee, LoRaWAN and Modbus device definitions and manufacturer documents. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A device that documents Zigbee 3.0, LoRaWAN or Modbus support connects to EpiSensor Edge through that protocol. A device page lists what the device reports, how to set it up and, where one exists, the Edge template for it.
Every page cites its sources. Zigbee device photographs come from the Zigbee2MQTT project and are credited under each photograph. We never run code from these sources, and register maps are for reading: never write to a meter from a map on this site.
Tell us the manufacturer and model, and we'll look at its documentation.
