CCTFR6400
Temperature/Humidity measurement with thermostat interface. Reports humidity, and exposes a heating setpoint with battery level.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Temperature/Humidity measurement with thermostat interface. Reports humidity, and exposes a heating setpoint with battery level.
Heating thermostat. Reports power and cumulative energy, and exposes a heating setpoint and an operating mode.
Wiser power micromodule. Reports power and cumulative energy, and exposes a switched output and power-on behaviour.
Power meter. Reports voltage, current, power, frequency, harmonic distortion and temperature.
Zigbee smart plug with power meter. Reports power and cumulative energy, and exposes a switched output.
Zigbee load actuator with power meter. Reports power and cumulative energy, and exposes a switched output.
Wiser H-Relay (HACT). Reports power and cumulative energy, and exposes a heating setpoint.
Wiser radiator thermostat (VACT). Exposes a heating setpoint with battery level and field calibration.
Smart thermostat. Reports power and cumulative energy, and exposes a heating setpoint, an operating mode and a child lock.
Zigbee smart socket with power meter. Reports voltage, current, power and cumulative energy, and exposes a switched output and power-on behaviour.
Zigbee smart socket with power meter. Reports voltage, current, power and cumulative energy, and exposes a switched output and power-on behaviour.
Power meter. Reports voltage, current, power, cumulative energy, frequency and demand.
Power meter. Reports voltage, current, power, cumulative energy, power factor and demand.
Meter. Reports power and cumulative energy, in charge-point, grid and solar roles. Connects over Modbus RTU (RS-485).
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.