ZG-227ZL
Temperature & humidity LCD sensor. Reports temperature and humidity with battery level and field calibration.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Temperature & humidity LCD sensor. Reports temperature and humidity with battery level and field calibration.
Wall thermostat with humidity sensor. Reports humidity, and exposes an operating mode and a child lock with field calibration.
Two gang switch with colored backlight modes. Exposes a switched output, a child lock and power-on behaviour.
Treatlife human presence sensor. Reports light level and occupancy with battery level.
2 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
3 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
4 gang smart switch with backlight and neutral wire. Exposes a switched output and power-on behaviour.
Smart switch (4 gang + 2 scene) with backlight and neutral wire. Exposes a switched output and power-on behaviour.
Weather station with clock, internal/external temperature and humidity. Reports temperature and humidity.
Wall thermostat. Exposes an operating mode and a child lock with field calibration.
24G MmWave radar human presence motion sensor. Reports light level and distance, and exposes a switched output.
24G MmWave radar human presence motion sensor. Reports light level and distance, and exposes a switched output.
24G MmWave radar human presence motion sensor (added distance switch).
Power meter. Reports voltage, current, power, frequency, demand and harmonic distortion. Connects over Modbus RTU (RS-485) and Modbus TCP.
Universal dimmer D1. Reports power and cumulative energy, and exposes a switched output and dimming.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.