TS0601_smart_air_house_keeper
Smart air house keeper. Reports temperature, humidity, CO₂ and particulates.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Smart air house keeper. Reports temperature, humidity, CO₂ and particulates.
Smart Human presence sensor. Reports light level.
Smart temperature switch with manual and automatic modes: heating & cooling. Exposes a switched output with field calibration.
Soil sensor. Reports temperature and soil moisture with battery level.
Soil sensor. Reports temperature and soil moisture with battery level.
1 gang stairwell switch with child lock. Exposes a switched output and a child lock.
6 gang switch. Exposes a switched output and power-on behaviour.
CO2 sensor. Reports temperature, humidity and CO₂.
Temperature and humidity sensor. Reports temperature and humidity.
Temperature & humidity sensor. Reports temperature and humidity with battery level.
Temperature & humidity sensor. Reports temperature and humidity with battery level.
Radiator valve with thermostat. Exposes a switched output, valve position, an operating mode and a child lock with field calibration.
Thermostatic radiator valve. Exposes a switched output, valve position, an operating mode and a child lock with battery level and field calibration.
Thermostat radiator valve. Exposes an operating mode and a child lock with field calibration.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.