Tuya · ControlTS0726_switch_4g_2s

COSWALL smart switch (4 gang + 2 scene). Exposes a switched output.

Tuya TS0726_switch_4g_2s device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch - - -
state_l1 binary Read and write - -
state_l2 binary Read and write - -
state_l3 binary Read and write - -
state_l4 binary Read and write - -
power_on_behavior_l1 enum Read and write - -
power_on_behavior_l2 enum Read and write - -
power_on_behavior_l3 enum Read and write - -
power_on_behavior_l4 enum Read and write - -
backlight_mode binary Read and write - -
switch_mode_l1 enum Read and write - -
switch_mode_l2 enum Read and write - -
switch_mode_l3 enum Read and write - -
switch_mode_l4 enum Read and write - -
action enum Read - -

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Tuya/TS0726_switch_4g_2s (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.