Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
The IP65 LoRa(WAN) Enless temperature sensor has been designed for temperature measurement in industrial or difficult environments (warehouses, factories, heating plants, greenhouses…).
Designed for ambient measurement in tertiary indoor environments, the LoRa(WAN) Enless VOC, temperature and humidity sensor allows you to monitor the values necessary for the comfort of building occupants.
The LoRaWAN Enless open/close sensor is specially designed for indoor commercial environments. It enables real-time monitoring of the open or closed status of doors and windows, helping to secure premises and optimize building energy consumption.
The SQUID is a connected sensor equipped with 12 clamps of current measurement. It sends the collected current measurements via a communication LoRa® wireless and long distance.
Monitoring of energy efficiency and energy cost allocation, operation of sub-range meters in large buildings, large plants, farms and urban areas are the best application for LoRa®-based CARLO GAVAZZI systems.
The LS-113G air quality sensor is an indoor sensor for determining the temperature, humidity and fine dust content of the room air. With calibrated dust (PM2.5) sensor module and compensated Temperature/ Humidity sensor integration, the data is ready for use.
Measure indoor comfort by monitoring CO2, temperature, humidity, presence. Reports temperature, humidity and CO₂.
The Office Occupancy Counter measures how rooms are used. By measuring traffic in the passageways, occupancy can be clarified and the information used to determine the utilisation of a building or room.
People Counter for accurate counting without setting up count lines or calibration. By measuring traffic in the passageways, occupancy can be clarified and the information used to determine the utilisation of a building or room.
MICA is a smart indoor air quality monitor supporting LoRaWAN, Wi-Fi, NB-IoT/LTE-M and Sigfox connectivity that measures temperature, relative humidity, CO₂, TVOC, PM2.5 and PM10, and delivers advanced virtual indicators including thermohygrometric comfort,…
MICA Mini is a compact indoor air quality sensor with LoRaWAN, Wi-Fi, NB-IoT/LTE-M and Sigfox connectivity, measuring temperature, relative humidity and CO₂, and providing thermohygrometric comfort, ventilation efficiency and resistance to mold growth…
MICA Plus is an advanced indoor air quality monitor with LoRaWAN, Wi-Fi, NB-IoT/LTE-M and Sigfox connectivity, measuring temperature, relative humidity, CO₂, TVOC, PM1.0, PM2.5, PM4.0, PM10 and formaldehyde, and providing thermohygrometric comfort,…
MICA WELL is the most comprehensive indoor air quality monitoring device in the MICA range, featuring LoRaWAN, Wi-Fi, NB-IoT/LTE-M and Sigfox connectivity and measuring temperature, relative humidity, CO₂, TVOC, PM1.0, PM2.5, PM4.0, PM10, formaldehyde, ozone,…
The ioTracker features multiple localisation technologies like GPS, WiFi, Bluetooth 5.1 and LoRa triangulation. This provides the best balance between high-accurate positioning and power efficiency in almost every in- and outdoor situation.
Sever WLD is a water leak detector that installs like tape. You can use it to monitor for water leaks where you couldn't monitor before.
The compact radio module for the T550 meters, transmits measurements of flow, backflow and energy in a heat or cold circuit with water using the ultrasonic principle.
MClimate CO2 Sensor and Notifier is a device that uses NDIR technology to measure the actual CO2 and has built in temperature and humidity sensors.
MClimate Flood Sensor is a compact flood sensor suitable for residential and commercial applications. If a flood is detected, data is immediately transmitted.
MClimate HT LoRaWAN Sensor is an indoor temperature and humidity sensor with 10+ years of battery life, configurable settings and discreet design.
The MClimate HT LoRaWAN® Sensor is an indoor temperature and humidity sensor with 10+ years of battery life ideal for monitoring environments in residential and commercial buildings.
MClimate Multipurpose Button LoRaWAN® is a simple but versatile device with many applications. Featuring a single button with 3 types of clicks and a temperature sensor, there are unlimited configuration options across industries and end customers.
With Vicki's multi-room home heating control, you can not only turn on and off the radiators in your house, but adjust the heating power of each of them separately.
The MClimate Vicki is a smart radiator thermostat valve that contains a temperature and humidity sensor allowing for temperature control and monitoring temperature and humidity from distance through a LoRaWAN® network.
With Vicki's multi-room home heating control, you can not only turn on and off the radiators in your house, but adjust the heating power of each of them separately.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.
