SIN-4-1-20_LEX
ENKI LEXMAN 3680W single output relay. Exposes a switched output and power-on behaviour.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
ENKI LEXMAN 3680W single output relay. Exposes a switched output and power-on behaviour.
Multifunction relay switch with metering. Reports power and cumulative energy, and exposes a switched output and power-on behaviour.
ENKI LEXMAN Access Control. Exposes a switched output and power-on behaviour.
Equation pilot wire heating module. Reports power and cumulative energy, and exposes a switched output.
ERIA smart plug (with power measurements). Reports voltage, current and power, and exposes a switched output.
ERIA built-in dimmer module (with power measurements). Reports voltage, current and power, and exposes a switched output, dimming and power-on behaviour.
ERIA built-in on/off relay (with power measurements). Reports voltage, current and power, and exposes a switched output and power-on behaviour.
Pico switch with power meter. Reports voltage, current, power and cumulative energy, and exposes a switched output.
Smart temperature & humidity Sensor. Reports temperature and humidity with battery level.
Radiator valve with thermostat. Exposes a switched output, an operating mode and a child lock with battery level.
Amina S EV Charger. Reports voltage, current and power, and exposes a switched output.
1 gang switch module - without neutral wire. Exposes a switched output and power-on behaviour.
2 gang switch module - without neutral wire. Exposes a switched output and power-on behaviour.
3 gang switch module - without neutral wire. Exposes a switched output and power-on behaviour.
2 gang wall switch module. Exposes a switched output and power-on behaviour.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.