POK001
Battery powered retrofit valve. Exposes a switched output with battery level and device status.
Find meters, sensors and controllers by manufacturer, protocol and application, then see the exact route into EpiSensor Edge.
2959 searchable, source-backed device records
Battery powered retrofit valve. Exposes a switched output with battery level and device status.
Soil moisture and temperature sensor. Reports temperature and humidity with battery level.
Water level and temperature sensor. Reports temperature and contact state with battery level.
Temperature and Humidity sensor. Reports temperature and humidity with battery level.
Battery powered garden valve. Exposes a switched output with battery level and device status.
Battery powered thermostat relay. Reports temperature, and exposes a switched output with battery level.
Water level and temperature sensor. Reports temperature, humidity and contact state with battery level.
20 dBm Zigbee router with battery backup for indoor/outdoor use. Reports battery level.
External probe temperature sensor: k-type. Reports temperature with battery level.
External probe temperature sensor: pt1000. Reports temperature with battery level.
Battery powered window opener. Exposes a switched output and valve position with battery level and device status.
Battery powered greenhouse vent. Exposes a switched output and valve position with battery level and device status.
Battery powered window handle. Reports contact state, and exposes a switched output and valve position with battery level and device status.
Battery powered thermostat valve. Exposes a switched output, a heating setpoint and an operating mode with battery level and field calibration.
No devices match your filters
Try a broader model fragment, manufacturer or application.
The database combines maintained Zigbee, LoRaWAN and Modbus sources for discovery. Exact manufacturer and model identities are joined; similar names are never assumed to be the same device.
A source record establishes a documented protocol route. A device page adds the model-specific interface, point map and commissioning steps, and where an Edge template exists it is offered there.
Third-party images are not republished without asset-rights review. Embedded upstream code is never executed. Modbus previews are read-oriented examples and must not be used as the basis for register writes.