Slacky-DIY · MeteringTS011F_plug-SlD

Plug with power monitoring. Reports voltage, current, power and cumulative energy, and exposes a switched output and power-on behaviour.

Slacky-DIY TS011F_plug-SlD device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch - - -
state binary Read and write - -
power_on_behavior enum Read and write - -
key_lock binary Read and write - -
led_control enum Read and write - -
power numeric Read W -
voltage numeric Read V -
ac_frequency numeric Read Hz -
current numeric Read A -
energy numeric Read kWh -
energy_reset enum Write - -
protect_control binary Read and write - -
automatic_restart binary Read and write - -
voltage_min numeric Read and write V 0-300
voltage_max numeric Read and write V 0-300
current_max numeric Read and write A 0-16
power_max numeric Read and write W 0-3600
time_reload numeric Read and write sec 5-60

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Slacky-DIY/TS011F_plug-SlD (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.