Repenic Ltd. · MeteringRD-250ZG

Dimmer. Reports voltage, current, power and cumulative energy, and exposes a switched output, dimming and power-on behaviour.

Repenic Ltd. RD-250ZG device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
light light - - -
state binary Read and write - -
brightness numeric Read and write - 0-254
effect enum Write - -
power_on_behavior enum Read and write - -
power numeric Read W -
voltage numeric Read V -
current numeric Read A -
energy numeric Read kWh -
min_brightness numeric Read and write - 1-99
max_brightness numeric Read and write - 1-100
start_brightness numeric Read and write - 0-254
boost binary Read and write - -
dimming_mode enum Read and write - -
default_move_rate numeric Read and write - 1-10

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Repenic Ltd./RD-250ZG (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.