Manhot · ControlMH03-2Z-OLED

OLED Screen Switch 2 Gang. Exposes a switched output and a child lock.

Manhot MH03-2Z-OLED device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch — — —
state_l1 binary Read and write — —
state_l2 binary Read and write — —
countdown_1 numeric Read and write s 0–43200
countdown_2 numeric Read and write s 0–43200
child_lock binary Read and write — —
backlight_switch binary Read and write — —
backlight_lightness numeric Read and write — 1–100
displayoff_delay numeric Read and write s 10–180
relay_status enum Read and write — —
light_mode enum Read and write — —
on_color enum Read and write — —
off_color enum Read and write — —
sw1_name text Read and write — —
sw2_name text Read and write — —
press_on_fun enum Read and write — —
press_off_fun enum Read and write — —

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Manhot/MH03-2Z-OLED (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.