KnockautX · ControlPIMS3028

Cover plug-in receiver multi STAK 3/STAS 3. Exposes a switched output and valve position with field calibration.

KnockautX PIMS3028 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
state enum Read and write - -
cover cover - - -
state enum Read and write - -
position numeric Read and write % 0-100
mode enum Read and write - -
control_back enum Read and write - -
auto_power binary Read and write - -
work_state enum Read - -
time_total numeric Read s 0-600
situation_set enum Read - -
fault binary Read - -
cover_limit enum Read and write - -
favorite_position numeric Read and write % 0-100
angle_horizontal numeric Read and write ° 0-100
calibration enum Read and write - -
quick_calibration numeric Read and write s 0-900
switch binary Read and write - -
reset enum Read and write - -

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. KnockautX/PIMS3028 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Related

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.