EFEKTA · EnvironmentalNetuya_CO2_Smart_Box

CO2 Smart Monitor, rgb indicator, alarm, can control the relay. Reports CO₂, and exposes a switched output and dimming.

EFEKTA Netuya_CO2_Smart_Box device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
identify enum Write
co2 numeric Read ppm
lifetime numeric Read Hours
light light
state binary Read and write
brightness numeric Read and write 0–254
night_onoff_backlight binary Read and write
night_on_backlight numeric Read and write Hr 0–23
night_off_backlight numeric Read and write Hr 0–23
alarm binary Read and write
alarm_volume numeric Read and write 0–10
alarm_level numeric Read and write ppm 400–5000
calibration_mode binary Read and write
forced_recalibration binary Read and write
factory_reset_co2 binary Read and write
manual_forced_recalibration numeric Read and write ppm 0–5000
invert_logic_onoff binary Read and write
enable_co2_gas binary Read and write
high_co2_gas numeric Read and write ppm 400–5000
low_co2_gas numeric Read and write ppm 400–5000

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. EFEKTA/Netuya_CO2_Smart_Box (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.