Develco · MeteringSIRZB-111

Customizable siren. Reports level, and exposes a switched output with battery level.

Develco SIRZB-111 device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
battery numeric Read % 0-100
voltage numeric Read mV -
smoke binary Read - -
battery_low binary Read - -
supervision_reports binary Read - -
restore_reports binary Read - -
test binary Read - -
warning composite Write - -
mode enum Write - -
level enum Write - -
strobe_level enum Write - -
strobe binary Write - -
strobe_duty_cycle numeric Write - 0-10
duration numeric Write s -
max_duration numeric Read and write s 0-900
squawk composite Write - -
state enum Write - -

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Develco/SIRZB-111 (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.