Aqara · MeteringZNXNKG01LM

Smart rotary knob H1 (with neutral). Reports voltage, current, power and cumulative energy, and exposes a switched output.

Aqara ZNXNKG01LM device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch
state_left binary Read and write
state_center binary Read and write
state_right binary Read and write
device_temperature numeric Read °C
power_outage_count numeric Read
power_outage_memory binary Read and write
operation_mode enum Read and write
action_rotation_angle numeric Read *
action_rotation_angle_speed numeric Read *
action_rotation_percent numeric Read %
action_rotation_percent_speed numeric Read %
action_rotation_time numeric Read ms
action_rotation_button_state enum Read
energy numeric Read kWh
voltage numeric Read V
current numeric Read A
power numeric Read W
action enum Read

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Aqara/ZNXNKG01LM (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.