Aqara · MeteringZNQBKG42LM

Smart wall switch Z1 Pro (single rocker). Reports voltage, current, power and cumulative energy, and exposes a switched output and power-on behaviour.

Aqara ZNQBKG42LM device photograph
Photograph: Zigbee2MQTT (GPL-3.0)

Connection

EpiSensor Gateway with Zigbee radio running Edge

Documented Zigbee support describes the path Edge would use. It is not an EpiSensor compatibility claim for this model.

Readings and controls

What the pinned upstream definition exposes for this exact model. Units and ranges are only shown when that source states them.

Swipe to see every column

Download
Name Type Access Unit Range
switch switch
state binary Read and write
device_temperature numeric Read °C
power_outage_count numeric Read
power_on_behavior enum Read and write
operation_mode enum Read and write
lock_relay binary Read and write
energy numeric Read kWh
voltage numeric Read V
current numeric Read A
power numeric Read W
led_disabled_night binary Read and write
click_mode enum Read and write
action_slide_time numeric Read ms
action_slide_speed numeric Read mm/s
action_slide_relative_displacement numeric Read
action_slide_time_delta numeric Read ms
mode_switch enum Read and write
action enum Read

Commissioning

A live socket is not a live measurement. Prove the decode, then keep the map.

  1. Pair the device on the Gateway Zigbee radio in Edge.

  2. Confirm the reported manufacturer and model match this page.

  3. Prove one known reading or control before enabling the rest of the points.

Sources

  1. Aqara/ZNQBKG42LM (opens in a new tab) zigbee-herdsman-converters · v26.111.0

Built from the pinned Device Directory snapshot. Product names and trademarks belong to their respective owners; publication does not imply endorsement, a commercial relationship, or that EpiSensor has tested this model.