Documentation
Technical datasheets, installation guides, and API references for the full EpiSensor product range.
Something missing?
Documentation library
ZGW-20 Gateway
Second-generation IoT gateway. Quad-core ARM, Ubuntu Core, Zigbee/Bluetooth/LoRaWAN, dual Ethernet, 3G/4G/5G cellular, GPS/GNSS, 250 devices.
ZGW-10 Gateway (Legacy)
Industrial IoT gateway. Raspberry Pi CM4, Ubuntu Core, Zigbee coordinator, multi-protocol data export.
ZEM-63 Electricity Monitor
Wireless three-phase electricity monitor. Class 0.5S measurement, split-core or Rogowski current sensors. Covers the ZEM-63; the ZEM-65 shares this specification.
ZEM-61 Electricity Monitor
Wireless 3-phase electricity monitor. Rogowski coil or CT input, 1% accuracy class.
ZDR-2X Demand Response Controller
Wireless demand response controller with relay outputs and electricity metering.
ZHT-1X Temp & Humidity Sensor
Battery-powered wireless temperature and humidity sensor. Up to 10-year battery life.
TES-1X Temperature Sensor
Wireless ambient temperature sensor. Battery-powered with up to 10-year life.
TES-2X Probe Temperature Sensor
Wireless temperature sensor with external probe input. Battery-powered, IP67 rated.
ZTS-1X Environmental Sensor
Multi-parameter environmental sensor. Temperature, humidity, CO2, light, and motion.
ZIO-2X Analogue Signal Sensor
Wireless 4-20mA analogue signal sensor. Connect any 4-20mA device to Zigbee mesh.
ZMB-3X Modbus Interface
Wireless Modbus RTU bridge over RS-485. Connect Modbus devices to the Zigbee mesh network.
ZPC-2X Pulse Counter
Wireless pulse/digital signal sensor. Count pulses from gas, water, or electricity meters.
ZGW-10 Gateway User Guide
Complete guide to Gateway setup, configuration, networking, data export, and administration.
ZHM-21 Wireless M-Bus Interface
Reads one wired M-Bus meter and sends its energy, volume and temperature records to the Gateway over the wireless network.
RTO-23 Wireless Range Extender
Mains-powered Zigbee range extender for extending mesh coverage across large commercial and industrial sites.
Gateway API Reference
HTTP API documentation for programmatic Gateway control and data retrieval.
ZGW-10 Quick Start Guide (legacy)
Setting up the discontinued ZGW-10 Gateway. For the ZGW-20, see the Gateway page.
Static IP Address Guide
How to configure a static IP address on the Gateway for enterprise network deployments.
Static IP Configuration (Linux)
Set a static IP address for the Gateway from a Linux workstation.
Static IP Configuration (Windows)
Set a static IP address for the Gateway from a Windows workstation.
Static IP Configuration (macOS)
Set a static IP address for the Gateway from a Mac workstation.
No documents found
Try a product family name or clear the filters. If you need a current specification that is not listed, our team can help you find the right document.